Plough leaf springs
Complete leaf spring and individual sheets
Characteristics:
Special, high elasticity steel with high capacity to recover initial geometry.
Specific integral heat treatment that provides each leaf with optimum characteristics.
The sheets are individually shot-blasted and painted before the set is assembled.
Epoxy paint with UVA protection.
Epoxy paint with UVA protection.
12500-7
KVERNELAND LEAF SPRING 12500
F Articles manufactured upon order
Sheets breakdown
12500-7
| Ref. | O. Ref. | C | A | B | Grs. | B | M |
| 12500-5 | 050706 | 4 | 770 | 170 | 16500 | 20 | M10 / 12 |
| 12500-7 | 060703 | 4 | 770 | 170 | 22100 | 18 | M10 / 12 |
12500-5 = 12500-H0 + 12500-H1 (2) + 12500-H2 + 12500-H3 + 12500-H4 (2)
12500-7 = 12500-H0 + 12500-H1 (2)+ 12500-H2 + 12500-H3 + 12500-H4 (2) + 12500-H5 (2)
Initial reccommended distance for mounting leaf spring (when flexed): 70 cm. (Distance between the wheelbase)
Leaf combinations are developed in accordance with customer's requirements.
The number of layers per leaf spring shall depend on the ground characteristics (soil type)
