Bellota Vibro tines
Uniformity guarateed by the pre-tension
•Special, high elasticity steel with high capacity to recover initial geometry.
•Specific integral heat treatment that provides each material with optimum characteristics.
•Pre-tensioned: Eliminate the first deformations to maintain the shape and be able to provide a consistent job.
•Epoxy paint with UVA protection.
Use:•These tines are specially designed to cut stubble, leaving the land loose from its vibrating tines.
•Working depth: 10-15 cm.
Pre-tensioned: eliminate the first deformations to maintain the shape and be able to provide a consistent job.
2454-1
Ref. | G | A | B | C | D | M | x1 | M. | Grs. | B |
2454-1 | 160 | 475 | 45 | 269 | M16 | 100 | 50x50 | 16000 | 30 | |
2454-M | 150x10mm | 50x50 | 9900 | 80 | ||||||
2454-B | 50x13mm | 2900 | 300 | |||||||
2454-T | 1000 |
Type VF
Fits with 1502 / 1502 S CN / 1503 / 1599
2455
Ref. | G | A | B | C | D | M | x1 | M. | Grs. | B |
2455 | 182,5 | 578,5 | 43-69 | 319,5 | M16 | 100 | 100x100 | 23100 | 30 | |
2456 | 150x14mm | 100x100 | 16700 | 60 | ||||||
2457 | 50x22mm | 43-69 | 6500 | 150 | ||||||
2458 | 294 |
Type VFM
Fits with 1571 / 1577 / 15106
2495
Ref. | O. Ref. | G | A | B | C | D | M | M. | Grs. | B | D |
2495 | 197 | 572 | 40 | 311 | M16 | 9530 | 90 | 100 | |||
2493 | 101000835 | 65X13mm | 197 | 311 | 70x70 | 6920 | 140 | 100 | |||
2494 | 101000837 | 50x10mm | 444 | 40 | 2510 | 400 | 100 | ||||
2454-T | 1000 |
Type VTH
Fits with 15037 CA / 15103 / 15104
2525
Ref. | Grs. | B | A | B | C | D | G | M | D |
2525 | 9600 | 90 | 170 | 466 | 300 | M12 | 100 | ||
2522 | 3700 | 200 | 50x10mm | 100 | |||||
2523 | 3300 | 200 | 50x10mm | 100 | |||||
2524 | 2550 | 400 | 25x25mm | 100 |
Fits with 15072CA